Động cơ JR127-10

Thông số kỹ thuật động cơ JR127-10

đại lý JR127-10 | nhà phân phối JR127-10

JR Series Wound Rotor Three-phase Asynchronous Motor

Cấu hình tính năng:

JR series motor is wound rotor three-phase asynchronous motor. It meet the standard of JB 564-64 technical requirements. JR series must insert starting rheostat in rotor circuit in advance, and can’t be started directly by short circuiting the rotor winding. The basic mounting mode of this type is horizontal installation with bottom foot. It should be connected with the driven machine by coupler device. JR motor adopted a double – sided radial ventilation system and antifriction bearing. By the side of shaft extension end, the outlet box is on the right of the frame. It can be reduced power running for long time in condition of reduce the torque.

Application:

Slip ring lifting, Ventilator, compressor, water pump, crusher, ball mill, stock-removing machine, transport machine and other machinery.

It can be prime mover of industries like coal mine, mechanical industry, power station and different kinds of manufacturing and mining industries.

Operation Condition:

Nhiệt độ môi trường: -15°C≤θ≤40°C

Độ cao: not exceed 1000m

Điện áp định mức:380V

Tần số định mức: 50Hz, 60Hz

Protection: the main body of the motor is IP54, but

The terminal box reaches IP55

Insulation class: F,H

Cooling method: IC0141

Duty: S1(continuous)

The Meaning of the Mã hiệu:

JR 115 -6

JR— Wound rotor asynchronous motors

11—Center height of frame

5—Core Length

6—Pole number

Note: JR series motor has two types: brushes lifting with short-circuiting device and brushless lifting with short-circuiting device.

Technical Parameter:

Type	Rated Power (KW)	Voltage (V)	Rated Value				Max torque ———— Rated torque	Rotor Voltage (V)	Rotor Current(A)	Rotor Flywheel Moment (N·m2)	Weight (kg)
			Speed	Stator current	Efficiency	Power factor	Max torque ———— Rated torque
			r/min	A	%	cosφ
JR114-4	115	380	1450	212	91	0.904	2	173	433	160	1035
JR115-4	135		1460	246	92.1	0.904	2.33	210	408	180	1130
JR116-4	155		1460	278	92.7	0.913	2.28	238	412	200	1200
JR117-4	180		1460	321	93.1	0.911	2.45	275	409	220	1270
JR126-4	225		1470	405	93.1	0.907	2.2	291	488	370	1660
JR127-4	260		1472	461	93	0.92	2.18	334	493	400	1760
JR128-4	300		1475	530	93.9	0.917	2.37	390	482	440	1890
JR136-4	220	6000	1475	26	91.7	0.894	1.97	307	457	590	2110
JR137-4	260		1480	30.3	92.3	0.897	1.92	346	481	630	2210
JR138-4	300		1478	35	92.4	0.9	1.96	398	483	710	2320
JR147-4	360		1479	41	93.1	0.904	2.68	558	406	850	3000
JR148-4	440		1475	49	93.44	0.92	2.68	634	410	1000	3300
JR1410-4	500		1482	55.5	94.1	0.92	2.44	717	420	1200	3600
JR158-4	680		1480	77.8	93.8	0.87	2.7	722	586	1700	4500
JR 1510-4	850		1483	95.9	94.3	0.904	2.5	803	657	2100	4700
JR 1512-4	1050		1480	118	94.4	0.9	2.3	1035	630	2500	5450
JR115-6	75	380	965	142	90.3	0.89	1.98	127	382	210	1025
JR 116-6	95		970	177	91.74	0.891	2.33	162	371	240	1115
JR 117-6	115		973	213	92.1	0.893	2.32	191	381	260	1170
JR125-6	130		976	245	91.4	0.882	1.87	187	445	400	1450
JR 126-6	155		977	294	91.1	0.873	1.85	219	455	440	1530
JR 127-6	185		977	334	92.8	0.907	2.27	366	319	490	1560
JR 128-6	215		979	385	93.3	0.908	2.44	424	317	540	1630
JR136-6	240		977	436	93	0.905	1.85	407	376	760	1970
JR 137-6	280		981	507	93.14	0.907	2.15	490	360	840	2030
JR148-6	310	6000	983	36.8	91.99	0.88	2.2	505	374	1650	3360
JR 1410-6	380		983	44.7	92.5	0.88	2.1	590	391	1850	3630
JR 157-6	460		985	54	92	0.87	2	568	517	2300	3700
JR 158-6	550		985	64	92.5	0.87	2	618	570	2600	4000
JR 1510-6	650		985	75	93	0.87	2.1	741	560	3300	4500
JR 1512-6	780		985	89	93.5	0.88	2.2	862	570	4000	4750
JR115-8	60	380	720	120	89.38	0.846	2.59	172	230	250	980
JR 116-8	70		723	137	90.27	0.856	2.57	199	225	280	1060
JR 117-8	80		723	154	90.96	0.869	2.45	222	230	310	1135
JR125-8	95		725	183	90.55	0.867	1.89	213	292	450	1380
JR126-8	110		726	212	90.75	0.866	1.84	243	294	510	1550
JR127-8	130		728	242	92.15	0.88	2.04	256	324	570	1500
JR128-8	155		732	291	92.54	0.875	2.3	309	316	640	1600
JR136-8	180		735	345	92.25	0.858	2	354	323	770	1850
JR137-8	210		734	400	93	0.86	1.84	394	341	850	1940
JR138-8	245		734	453	93.1	0.86	1.8	425	365	850	2060
JR147-8	200	6000	738	25.7	91.6	0.818	2.5	406	299	1500	3090
JR148-8	240		738	30.6	92	0.821	2.43	457	319	1650	3300
JR1410-8	280		740	35.7	92.3	0.818	2.55	550	309	1850	3600
JR157-8	320		739	39	92.5	0.86	2.2	509	395	2300	3700
JR158-8	380		738	45.6	93	0.86	2.22	547	436	2600	4000
JR1510-8	475		738	56	93.28	0.856	2.031	641	468	3300	4500
JR1512-8	570		738	66.9	93.72	0.86	1.981	698	514	4000	4750
JR115-10	45	380	577	97	88	0.8	2.21	117	252	260	950
JR116-10	55		577	116	89	0.805	2.17	140	256	280	1040
JR117-10	65		577	135	89	0.81	2.16	159	263	310	1110
JR125-10	80		574	164	90.15	0.817	1.96	168	309	460	1350
JR126-10	95		573	193	90.44	0.825	1.83	188	326	520	1440
JR127-10	115		575	233	90.9	0.82	1.92	225	328	580	1590
JR128-10	130		575	261	91.14	0.826	1.83	251	333	650	1720
JR137-10	155		583	307	91.45	0.854	2	354	280	930	1920
JR138-10	180		583	346	91.6	0.86	1.8	387	300	1050	2090
JR1410-10	200	6000	590	27	90.5	0.8	2.7	511	248	2100	3300
JR157-10	260		588	33.5	91.2	0.81	2.1	412	406	3000	3700
JR158-10	310		585	39.5	91.7	0.81	2	442	454	3400	4000
JR1510-10	400		585	50.3	92	0.82	2.2	554	467	4200	4500
JR1512-10	480		585	60	92.9	0.81	2.3	602	512	5100	4750
JR1510-12	280		490	38	91.4	0.77	2.2	478	380	4200	4500
JR1512-12	330		490	44	91.7	0.78	2.1	515	413	5100	4750

Dimension:

JR slip ring induction motor Dimensions

Động cơ JR127-10

Động cơ JR127-10

JR Series Wound Rotor Three-phase Asynchronous Motor

Brand

China

Động cơ JR127-10

Động cơ JR127-10

JR Series Wound Rotor Three-phase Asynchronous Motor

Brand

China

Sản phẩm tương tự

Đăng nhập